English Version    首页

产品目录

阀门信息

HQ球形止回阀

HQ球形止回阀


用途及特点USAHE AND CHARACTERISTICS
  微阻球形止回阀,采用橡胶包皮球为阀瓣,在介质的作用下,可在阀体内的滑道上滚动,从而打开或关闭阀门。流量大流阻损失小,密封性能好,消声关闭,可减小水击波。水平或垂直安装均可。可用于冷水、热土、工业及生活污水等管网的水泵出口,防止介质倒流。
It uses the rubber covered roller as the disc, which, under the action of the medium, can roll up  an down along with the sliding path inside of the valve so as to open or close it, and features a big flow, small flow-resistance loss, good tightness, silenced close and reduced water shock wave, It is vertically or horizontally mountable and can be used on the outlet of the water pump of the cold-water, hot-water, industrial and living sludge pipe networks to prevent the medium from going back.

主要技术参数 MAIN TECHNICAL PARAMETRS

型号 公称压力
PN(MPa)
壳体实验
压力(MPa)
密封试验
压力(MPa)
阀体材料 球体材料
HQ44 45X-10 1.0 1.5 1.1 铸铁 碳钢包胶
HQ44 45X-10 1.6 2.4 1.76

主要外形尺寸及连接尺寸MAIN EXTERNAL ANDCONNECTIONG DIMENSIONS

 HQ44X-10 16外形尺寸
公称通径DN 50 65 80 100 125 150 200 250 300
L 140 165 200 230 260 310 410 430 500
D 160 180 195 215 245 280 355 405 460
D1 125 145 160 180 210 240 295 355 410
D2 100 120 135 155 185 210 265 320 375
H 180 210 225 245 280 320 380 450 510




主要外形尺寸及连接尺寸MAIN EXTERNAL ANDCONNECTIONG DIMENSIONS

HQ45X-10 16外形尺寸
公称通径DN 200 250 300 350 400 450 500 600 700 800 900 1000
L 550 650 750 850 950 1050 1150 1350 1450 1650 1900 2100
D 360 425 485 550 610 660 730 840 955 1070 1180 1305
D1 310 370 430 490 550 600 660 770 875 990 1090 1210
D2 278 332 390 448 505 555 610 718 815 930 1025 1140
H 510 570 640 715 815 825 980 1155 1260 1350 1660 1700

上一个: 1000X限流止回阀    |   [返回]    |   下一个: HH47、H47XF、HDH47X蝶式缓冲止回阀

关键词

止回阀 上海止回阀